zamak ingot
zamak ingot

Zamak 7

Zinc Alloy 7 / ZL 7

Zamak 7 has less magnesium than zamak 3 to increase fluidity and ductility, which is especially useful when casting thin wall components. In order to reduce inter-granular corrosion a small amount of nickel is added and impurities are more strictly controlled.

ZL 7 proved casting fluidity, ductility and surface finish.
Higher fluidity is sometimes desirable especially on components with intricate detail, however it does present special casting considerations

Zinc Alloy 7 exhibits excellent damping capacity and vibration attenuation in comparison with aluminum die casting alloys.

Zamak 7 is mostly used for special hardware applications, or when castings require extra formability during subsequent assembly operations such as crimping or staking. Its higher fluidity also allows thinner walls to be cast

The high ductility exhibited by this alloy also has an impact on processing, but mainly in secondary operations for flash removal and trimming

Product of Origins: Turkey

Min Order             : 20 tons

20 DC Container  : Can be loading 27 tons

Delivery Time       : 5 – 10 days after full payment

Location                : Istanbul or Kocaeli / Turkey

Payment Term       : %100 Cash Advance Payment ( %30 deposit + %70 before loading )

        LME Price will be confirmed after the deposit payment has been confirmed.

Zamak 7 Chemical Composition

wdt_ID Guaranteed Analysis (in %) Zamak 7 / Zinc Alloy 7 / ZL 7
1 Al 3.9 - 4.3
2 Cu ≤ 0.1
3 Mg 0.01 - 0.02
4 Pb ≤0.003
5 Fe ≤0.075
6 Cd ≤0.002
7 Sn ≤0.001
8 Si ≤0.002
9 Ni ≤0,001