Zamak 5 NON European Standard
Zinc Alloy 5 / ZL 5 / ZL0410 / ZnAl4Cu1
ZL0410 has the same composition as zamak 3 with the addition of 1% copper in order to increase strength (by approximately 10%), hardness and corrosive resistance, but reduces ductility. It also has less dimensional accuracy Zamak 5 is more commonly used in Europe.
Coating capability is good. It has few errors of dimension. It is especially used in accessories and automobile industry.
• Zamak 5 is more readily plated, finished, and machined than Alloy 3
• When a measure of tensile performance is needed, ZL-5 castings are recommended.
• It has a higher copper content than Zamak 3, which results in higher strength
• It has less ductility (increased elongation) than Zamak 3
• Manufacturer must keep in mind that this reduction in ductility can affect formability during secondary operations such as bending, riveting, swaging, and crimping operations
Product of Origin : Turkey (Our Production)
Min Order : 5 tons (FOB 25 tons / EXW 5 – 25 tons)
20 DC Container : 25 tons
Delivery Time : 3 – 7 days after full payment
Factory Location : Kocaeli / Turkey
Loading Ports : Port of Evyap – Yilport – DP World
Payment Term : 100% TT ( 30% deposit + 70% before loading )
LME Price will be confirmed after the deposit payment has been confirmed.
Zamak 5 NON European Standard Chemical Composition
wdt_ID Guaranteed Analysis (in %) NON European Zamak 5 / ZL0410 / ZnAl4Cu1
1
Al
3.8 - 4.2
2
Cu
0.7 - 1.1
3
Mg
0.035 - 0.06
4
Pb
≤0.015
5
Fe
≤0.03
6
Cd
≤0.01
7
Sn
≤0.002
8
Si
≤0.02
9
Ni
≤0.002
| wdt_ID | Guaranteed Analysis (in %) | NON European Zamak 5 / ZL0410 / ZnAl4Cu1 |
|---|---|---|
| 1 | Al | 3.8 - 4.2 |
| 2 | Cu | 0.7 - 1.1 |
| 3 | Mg | 0.035 - 0.06 |
| 4 | Pb | ≤0.015 |
| 5 | Fe | ≤0.03 |
| 6 | Cd | ≤0.01 |
| 7 | Sn | ≤0.002 |
| 8 | Si | ≤0.02 |
| 9 | Ni | ≤0.002 |
