Satek Yellow Silicone Rubber For Spin Casting Zamak (Zinc Alloy)

http://www.zamakingots.com/image/cache/data/NEW_Silicone/satek-yellow-spin-casting-rubber-for-zamak-65-700x812.jpg
Product Code: SATEK-C-YELLOW

Satek Yellow Silicone Rubber For Spin Casting Zamak (Zinc Alloy)

Spin casting, also known as centrifugal rubber mold casting (CRMC), is a method of utilizing centrifugal force to produce castings from a rubber mold.

Centrifugal Spin-casting provides an economical solution for product development requirements, as well as short to medium production runs

Satek rubber mold centrifugal Spin-Casting System provides high levels of strength, close tolerances and excellent reproduction of detail.

It produces high-quality parts in commercial grade: zinc alloys , tin alloys and lead alloys.

Produce highly detailed decorative, novelty objects and hardware items with high quality and finish

Spin Casting Rubber For Centrifugal Zamak Casting

Strong enough to make complex mold
Less polishing of your castings
Mold cutting is much easier
The most competitive prices
 

Yellow Spin Casting Rubber

The required vulcanization time prolongs with increasing thickness of the rubber layer.

The factors that affect the shrinkage rate of the rubber compound: the higher the curing temperature, the greater the shrinkage rate. In general, the temperature of each increase of 10 degrees C, the shrinkage rate increased by 0.2% ~ 0.5%

Safe temperature: 135°C longer than 20 minutes

Typical temperature: 175°C about 12 minutes.

      Type

            Yellow

             Hardness

71 Shore

Vulcanization Temperature

1700C

    Vulcanization Time

        20 minutes

         Shrinkage

% 1-3

 

 

 

   Diameter

   Thickness

             Average Weight

Standard Product Size

    300 mm

      8 mm

                  1 Set = 2 Pieces = 2 - 2.1 Kg

Powerd by Fornax Web Design